2m High Bollards

The Memorial Gardens at Kilmore Quay in Co Wexford includes a walkway, a promenade area and monuments and opened in 2001.  In 2013, the area was extended and LED Bollard lighting and seating was added.  The LED Bollards were supplied with a 2m height.  Typically, this light Bollard is supplied at 1m and with 16w LED optics.  For this Project, the lighting is asymmetric – ie. on the path side only and the Shafts were made longer to provide a 2m height above ground.

2m Light Bollards

Other options on the LED Bollard include an Internal Occupancy Sensor to switch the lighting on when it detects movement nearby. Alternatively, the lighting can be set to operate at 10% at night time and the Occupancy Sensor would switch to 100%.  After a period of inactivity – no movements nearby – (typically 2 minutes), the lighting would return to its default setting – off or 10% output.

To get a detailed Proposal for your Bollard lighting project:

Please send Autocad drawing by email. There is no charge or obligation for suitable Projects.
We will calculate the number of light fittings required and advise light levels. We will advise where they should be located and the cost of the Equipment. Other lighting may need to be added for landscaped areas or to add decorative architectural effect.

Project Search

Application:

By continuing to use this site, you agree to the use of cookies. If you do not accept the use of cookies, simply exit the site. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close