Low Glare 200w LED HighBay

This LED HighBay is supplied with optics to 200w max.  At this wattage, it is designed to replace the most efficient of 400w Metal Halide HighBays. For older or less efficient 400w Metal Halide HighBays, this 200w LED will provide more light, so a lower LED wattage may be appropriate. Low Glare LED HighBay The deep acrylic prismatic lens  minimises glare and provides significantly higher vertical light levels (to provide brighter Walls, work surfaces, etc).  This avoids the disadvantage of many LED HighBays which have dark walls and have the perception of poor lighting.  The acrylic lens also provides a protection against accidental breakage of the LED optics.  This would minimise the chance of broken glass, which is an issue in some Industries, such as the Food Industry.  The LED optics and the Drivers are accessible to allow for future upgrades or maintenance, etc.

Typical HighBay Projects in the past were with 400w Metal Halide lamps.  These are still offered, but in most instances, the 200w LED will provide a better payback as energy costs and maintenance will be reduced.  The higher cost of LED equipment will be justified in Plants with longer running hours, especially 24/7  operation.

A recessed version is also available.  Several Projects have been installed, examples shown on this website include ABP Foods and Nypro.

Recent Posts

Pole Price Rises
Coronavirus photo
Coronovirus & VeeLite
Sports Capital Grants Ireland
Sports Capital Grants 2021


By continuing to use this site, you agree to the use of cookies. If you do not accept the use of cookies, simply exit the site. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.